Blog
Vivenda Residence: MEP Design for a Large Residential Complex in Bucharest
For Vivenda Residence, a residential complex developed by Hercesa in the east of Bucharest and planned with 1,400 apartments, MC General Construct designed the building services – heating, ventilation, plumbing, fire protection, electrical and extra-low-voltage systems – for buildings developed in stages, from 2015 to 2018. The project shows how a phased, consistent MEP design supports a large residential development and the comfort of the families who live there.

The project: a residential complex in east Bucharest
Our collaboration with Hercesa led to the design of the building services for a residential project that the developer itself describes as innovative. The Vivenda Residencias complex is located in the eastern part of Bucharest, near Basarabia Boulevard, and, at project stage, comprises 1,400 apartments.
The project is presented in our portfolio as Vivenda Residence, where we list the disciplines we covered: HVAC, plumbing and fire protection systems, low-voltage and extra-low-voltage installations.
A complex built in stages
The complex was not designed in one go, but building by building, over several years:
- 2015 – we produced the plans and drawings for the first building, with basement, ground floor and 11 upper floors (B+GF+11).
- 2016 – the second building rose, with basement, ground floor and 14 upper floors (B+GF+14).
- 2017 – buildings K1 and H1 followed.
- 2018 – work started on two more buildings, F3 and G3.
Buildings K1, H1, F3 and G3 all have basement, ground floor and 11 upper floors, together with parking.
For the MEP design, a phased programme like this is both a challenge and an opportunity. Each new building has to fit into infrastructure and site conditions that already exist, while the experience gained on the previous buildings can be carried into the next ones. Consistent technical solutions from one building to the next also make the complex easier to operate and maintain.

What MEP design means for a residential high-rise
Residential buildings with 12 to 15 levels above ground raise specific engineering questions. Without adding details that are not part of this project's record, these are the topics a residential MEP design has to solve:
Water supply and drainage
In a building of this height, the water supply has to reach the top floors with enough pressure without being excessive on the lower floors, which is why pressure is managed by zones and, where needed, by booster pumps. Domestic hot water must arrive quickly at every tap, and the drainage stacks must be sized and vented so that they work silently – an important detail in apartments.
Heating, ventilation and comfort
Thermal comfort in apartments depends on correctly calculated heat losses for each room, on balanced distribution networks and on simple, reliable controls for the residents. Ventilation of kitchens, bathrooms and underground parking has to ensure good air quality, while the noise of the installations must stay low in living spaces.
Fire protection
Residential high-rises and their parking areas need fire protection systems designed according to the fire safety concept and the P118 codes: hydrant networks, the systems required for the parking and coordination with the fire detection and alarm installation in the common areas.
Electrical and extra-low-voltage systems
The electrical design covers the supply of each apartment and of the common areas – staircases, lifts, technical rooms, parking and external lighting – including emergency lighting. Extra-low-voltage installations provide intercom, data and TV networks and fire detection, the systems residents use every day without noticing them.

Designed around the people who live there
We designed the installations with the comfort of the people and families who will live there in mind. In a residential building, good engineering is measured in simple everyday things: a warm home in winter, constant hot water, quiet installations, fresh air and a safe building.
Our job is not an easy one, but we do it with dedication and involvement, because our portfolio is built on the highest standards. You can find more about our approach to building services in our article on MEP design for comfort and energy efficiency, about our European network in the First Q Network article, and about everything we design on our services page.
Are you developing a residential project? Contact our team to discuss the building services from the earliest stage.
Frequently asked questions
Where is Vivenda Residence located?
In the eastern part of Bucharest, near Basarabia Boulevard.
How large is the Vivenda Residence complex?
At project stage, the complex comprises 1,400 apartments, in residential buildings with basement, ground floor and 11 to 14 upper floors, with parking.
What did MC General Construct design for Vivenda Residence?
The building services for the residential buildings developed by Hercesa: HVAC, plumbing and fire protection systems, low-voltage and extra-low-voltage installations.
In which years were the buildings designed?
The first building was designed in 2015 and the second followed in 2016; buildings K1 and H1 came in 2017, and in 2018 work started on buildings F3 and G3.

